English 
Views: 0 Author: Site Editor Publish Time: 2025-07-15 Origin: Site
Engine mounts might not be the flashiest part of your vehicle, but they’re absolutely vital to its performance and longevity. If you’ve been noticing excessive vibrations, clunking noises, or movement in your engine bay, there’s a good chance your engine mount could be the culprit.
In this guide, we’ll walk you through what engine mounts are, how they work, how to spot a failing mount, and how much it typically costs to replace them. Whether you’re a DIYer or planning to visit a mechanic, this article will give you a clear understanding of engine mount replacement and maintenance.
An engine mount (also called a motor mount) is a small but critical component in your vehicle. Its primary job is to hold the engine in place and absorb vibrations and shocks from the engine and the road. Most cars have three to four engine mounts made from metal and rubber or a combination of other vibration-dampening materials.
The rubber part helps isolate engine vibrations from the chassis, ensuring that you don’t feel the engine’s rumble inside the cabin. Some modern vehicles use hydraulic or electronically controlled mounts to offer even better comfort and performance.
| Function | Description |
|---|---|
| Secures Engine Position | Prevents the engine from shifting during acceleration or cornering |
| Vibration Damping | Reduces vibrations passed from engine to vehicle body |
| Noise Reduction | Minimizes engine noise inside the cabin |
| Structural Support | Helps align the engine with transmission and drivetrain |
If your engine mount is going bad, you’ll start noticing some warning signs. These issues typically worsen over time and can lead to other mechanical problems if left unaddressed.
Common symptoms of a failing engine mount:
Excessive vibration or shaking inside the cabin
Clunking or banging noises, especially when accelerating or shifting
Engine visibly moving or tilting when revving
A worn-out mount can place extra stress on other parts of the engine and transmission. So, identifying and addressing the issue early is key.
Replacing engine mounts requires a bit of mechanical skill, tools, and safety precautions. While it can be done by experienced DIYers, many prefer leaving this job to professional mechanics.
Use a pry bar or visual inspection to identify the damaged mount. You may also notice fluid leaks in hydraulic mounts.
Before removing a mount, support the engine using a jack and wood block to prevent it from shifting or dropping.
Loosen and remove the bolts that secure the old mount. This may require accessing hard-to-reach areas, depending on the mount’s location.
Place the new mount and align it correctly. Install bolts and tighten them to manufacturer specifications.
Ensure the engine is properly aligned and there’s no contact with surrounding parts.
Start the engine and go for a short test drive to check for abnormal vibrations or noises.
Note: Some vehicles have multiple mounts (front, rear, side, transmission), and it’s best to replace them in pairs or all at once if they're worn out.
The cost of changing engine mounts varies depending on your vehicle model, the number of mounts, and whether you do it yourself or hire a mechanic.
| Cost Type | Price Range (USD) |
|---|---|
| Parts Only | $40 – $200 per mount |
| Labor (Per Mount) | $100 – $300 |
| Total (1 Mount) | $150 – $500 |
| Full Replacement | $400 – $1,200+ |
Luxury or imported vehicles tend to cost more due to part availability and complex installation.
Hydraulic or electronic mounts also cost more than conventional rubber mounts.
While the engine mount replacement might seem expensive, ignoring a bad mount can lead to damage to your transmission, exhaust system, or even engine alignment—resulting in higher repair bills down the line.
A: You’ll experience excessive engine movement, vibrations, and noise. Over time, it can cause additional damage to the engine, transmission, and exhaust components.
A: It’s not recommended. While the vehicle might still run, the increased engine movement can lead to serious wear on other systems.
A: On average, engine mounts last 5 to 7 years or 60,000 to 100,000 miles, depending on driving habits, road conditions, and engine performance.
A: It’s possible for experienced DIYers with the right tools and knowledge. However, safety is critical as the engine needs to be supported securely.
A: Refer to your vehicle’s manufacturer specifications. Consider OEM or high-quality aftermarket options from trusted suppliers like Suhon Auto.
There are countless engine mount brands out there, but quality and reliability should always come first. A poorly made mount can wear out quickly, affecting both performance and safety.
That’s why Suhon Auto is a trusted name in the automotive parts industry, specializing in durable, precisely engineered engine mounts designed for a wide range of vehicle makes and models. Their parts are known for:
Excellent vibration isolation
Long-term durability
Precise OEM-fit specifications
Competitive pricing for bulk and retail orders
Whether you're a repair shop, distributor, or individual buyer, Suhon Auto offers the quality you need for peace of mind.
The engine mount is a silent hero under your hood, keeping your ride smooth and your engine stable. Understanding when and how to replace it—and being aware of the changing engine mounts cost—can save you from long-term damage and ensure a more comfortable ride.
If you're experiencing signs of a worn mount or planning a replacement, trust only reputable suppliers to avoid future headaches. We recommend sourcing your engine mounts from Suhon Auto, known for top-tier automotive components and customer satisfaction.
Contact Email: junz@suhonauto.com
Phone: +86 18138671291
Brand Name: Suhon Auto
